Telnet, serial ports and Mosh
Besides SSH, a saved server can use Telnet, a serial port or Mosh. Choose the protocol when you add or edit the server (Other protocols). Files, tunnels and AI access are available only on SSH.
Telnet
For old devices that only speak Telnet. Enter the address and port; there is no login prompt handled by the app and no host key. Telnet sends everything unencrypted, so use it only on networks you trust.
Serial port
- Select or type a port such as COM3 on Windows; the app lists the ports it finds.
- Set the speed (baud), data bits, parity (none, even, odd), stop bits and flow control (none, hardware RTS/CTS, software).
- If the port cannot be opened, check that the cable is plugged in and that no other program uses the port.
Mosh
- Mosh signs in with SSH (same credentials), starts mosh-server on the server, then runs the terminal over UDP so it survives network changes and sleep.
- mosh-server must be installed on the server (Ubuntu/Debian: sudo apt install mosh) and UDP ports 60000–61000 must be open in its firewall. If no UDP reply arrives for 8 seconds, the terminal shows a firewall hint.
- Closing the tab shuts mosh-server down; exit in the shell ends the terminal.
- Mosh does not work through a jump host.
- Servers (hosts), groups and quick connect: Add and organise SSH servers in the desktop app: groups, import from ~/.ssh/config, quick connect, startup commands, environment variables and agent forwarding.
- Terminals, tabs, split and broadcast typing: Terminal tabs and split panes, typing into every terminal of a tab, snippets, autocomplete from history, session logs, themes and keyboard shortcuts.